Provide rail chassis components for over 60 export markets
MAGEON Whatsapp +86-17625876676
FAQ

Can Individual Track Shoes Be Replaced, or Must the Whole Chain Go?

Bolt-on track shoes can be replaced individually when adjacent grouser wear differs by under 3 mm. Once chain pitch elongation exceeds 3%, replace the whole chain rather than mixing new and worn links.

Bolt-on track shoes can be changed individually, provided the grouser height difference between adjacent shoes is under 3 mm and the bolt holes are not elongated. If chain pitch elongation already exceeds 3%, replace the whole chain: mixing new links with worn ones immediately produces uneven mesh and tooth climbing. Measure across four to five links, compare with nominal pitch times the number of links, and act on the largest of several samples from both sides. Under 2% elongation continue normal 250-hour inspections, 2-3% shorten to 100 hours and stage spares, above 3% replace the chain. Inspect the sprocket flanks at the same time, since pointed or pitted teeth will shorten the new chain's life considerably.