Full-load gradeability is typically around 20 degrees; heavy, low-centre-of-gravity builds can be engineered for 25-30 degrees. That is a short-duration crossing capability, not permission to work continuously on such a slope. Above 15 degrees, derate allowable load by 10-20% and check frame torsion and roller ratings with one track carrying 70% of total load. Machines with a slewing upper structure need a separate lateral overturning moment calculation. Slope projects must also state the parking brake arrangement and fail-safe behaviour on hydraulic pressure loss. Acceptance should cover no creep when parked on a 20 degree gradient, a measured full-load climb, and roller temperature rise under eccentric load, with test conditions recorded.
English
简体中文