Economical travel speed for steel and rubber crawler undercarriages is 1.5-4 km/h; a two-speed motor can reach 5-6 km/h in the high range, but that figure is not intended as a continuous duty speed. Speed is set by motor displacement, reduction ratio and sprocket pitch circle, and it trades directly against tractive effort: chasing a higher top speed reduces low-speed torque while increasing hydraulic flow and throttling loss. At enquiry stage, state the work cycle timing and the longest continuous travel segment. Machines above 60% duty cycle also need a thermal balance check - final drive oil below 80C, roller temperature rise below 55C - because heat rejection, not peak torque, becomes the governing limit in continuous operation.
English
简体中文