Short wading is acceptable on a standard build, with depth limited to roughly the track roller centre, about 300-400 mm, followed by draining the lowest frame plug and regreasing once out of the water. The limit is set by rotating lip seals rather than frame height: a warm loaded roller cavity hits cold water, contracts and draws abrasive slurry through microscopic lip gaps, and that grit grinding the bearing is what ends service life. For paddy, riverbank or marsh duty, specify a labyrinth plus dual-lip seal, water-washout resistant NLGI 2 grease, a final drive breather relocated high on the frame, and a 100-hour regrease interval. A static immersion test on its own does not predict field performance, because ingress is driven by the breathing effect during travel.
English
简体中文