Provide rail chassis components for over 60 export markets
MAGEON Whatsapp +86-17625876676
FAQ

What corrosion-protection standard does the factory coating follow?

Default is ISO 12944 C3 (Sa 2.5 blast, epoxy build and polyurethane top, about 240 um); coastal and chemical sites upgrade to the C5-M system at 360 um.

The factory default follows ISO 12944 class C3 for medium corrosion environments: Sa 2.5 blast cleaning, zinc-rich epoxy primer, epoxy intermediate and polyurethane topcoat, about 240 microns total dry film, with custom colors matched to the OEM's code. Upgrade is recommended for coastal and terminal salt fog, chemical plants and de-icing-salt routes: the C5-M system runs 360 microns with stripe coats on all welds and edges and dacromet-coated fasteners, adding about 6 percent to cost. A C4 intermediate class is also available. On acceptance you can require a film-thickness report on a grid and photographs of the blast grade. The steel bodies of rubber-track machines follow the same system. Coating color, thickness class and acceptance method can all be written into the contract.