Provide rail chassis components for over 60 export markets
MAGEON Whatsapp +86-17625876676
FAQ

Can a track undercarriage reverse and spot-turn, and what does that demand structurally?

Yes - counter-rotating tracks give a near-zero turn radius; spot-turn torque runs 1.4-1.8 times straight travel, so drives and track hardware must be checked against it.

Yes: reversing and spot turning are native to track undercarriages - counter-rotating the two tracks at equal speed turns the machine within its own footprint. Two structural demands follow. First, drive torque: turning in place overcomes lateral slip friction, requiring roughly 1.4 to 1.8 times straight-travel torque depending on ground, so motors and reducers must be sized for the turning case, not the straight-line case. Second, twist endurance: machines that spot-turn constantly - grapples, piling rigs - accelerate idler and bushing wear, so specify heavy-duty bushings and halve the tension-check interval. Hard turns at full travel speed also cut the rail surface; keep site rules against full-speed pivoting. On custom builds MAGEON folds spot-turn frequency into the load spectrum used for sizing.