The division of labor: bottom track rollers transfer machine weight to the rail, the most heavily loaded group; top rollers support the upper strand and stop it slapping; the idler guides the track at the front and works with the tension cylinder. Failure signatures differ. A failing bottom roller leaks oil, wears one-sided and runs noisy, and at the extreme its flange cuts the link sides. A failing top roller shows as upper-strand vibration and audible slap at higher speeds. A failing idler pulls the machine sideways, raises derailment tendency and wears the front of the track abnormally. For daily screening, shoot each housing with an IR gun after an hour of travel: any roller more than 15 degrees C hotter than its neighbors goes on the check-first list. Never run on a failed roller - it accelerates wear across the whole track assembly.
English
简体中文