Three sources dominate: low-frequency impact as each track shoe meets the ground, chain-to-sprocket mesh noise, and pressure pulsation from the hydraulic motor and return line. On paved surfaces the shoe impact is most noticeable and is the main reason steel tracks are restricted in municipal work. Switching to rubber tracks typically cuts 8-15 dB, so indoor plants, landscaped areas and night work should start there. For steel builds, bolt-on rubber pads, tooth profile correction, correct chain tension and frame damping pads all help. A sudden noise increase concentrated on one side is rarely a design issue - it usually indicates tension misalignment, a seized track roller or a loose pin fit, and should be inspected before any acoustic treatment is considered.
English
简体中文